Welcome to Ampac

Ampac Brands

• FastSense
  • FastSense Plus
  • FastSense 100
  • FastSense 25
• ZoneSense
  • ZoneSense DH4
• ZoneSense PLUS
  • ZoneSense PLUS
  • ZoneSense PLUS AR
• FireFinder
  • Document Cabinets
  • FireFinder Multi-Loop FACP
  • FireFinder Multi-Zone FACP
  • High Level Interface Expander
  • Switch and Indicator Card
  • FireFinder Series II
  • SmartTerminal LCDA SlimLine
• SmartGraphics
  • SmartGraphics
• EV3000
  • EV100
  • EV3000
• Ancillaries
  • Labels
  • Analogue Devices
    • Alarm Acknowledgement Facility (AAF)
    • Loop Powered Zone Interface Device
    • XP95 Thermal A
    • XP95 Thermal B
    • Discovery Thermal C
    • Discovery Thermal D
    • XP95 Optical Smoke Detector
    • XP95 Ionization Smoke Detector
    • Discovery Multisensor
    • Discovery Carbon Monoxide Detector
    • XP95 Isolating Base
    • Ampac Integrated Base Loop Sounder
    • Ampac Powered Loop Beacon
    • Duct Sampling Unit
    • Single Input Device
    • Single Input Output Device
    • 3 Input Device
    • 3 Input Output Device
    • XP95 Manual Call Point
  • Conventional Detectors
    • Eight Zone Conventional Board
    • Orbis
    • Series 60 Ionization Smoke Detector
    • Series 60 Standard Base
    • Duct Sampling Unit
  • Door Holders
    • ADH-01 Surface Mounted Door Holder
    • DH1351 - Keeper Plate
    • DH1365
    • DH1368 - Flush Mounting Electro Magnetic Door Hold
    • DH1370/15 - 1370/30 - Electro-Magnetic Door Holder
    • H1330 - Magnetic Door Holder
    • H1369 Floor Mounted Electro Magnetic Door Holder
  • Manual Call Points
    • ACP-01 Manual Call Point
    • ACP-04 Manual Call Point
    • D101 Manual Call Point
    • FP2 Manual Call Point
  • Amplified Sound Systems
    • EV20
    • EV40
    • EV60
    • EV120
  • Audible Warning Devices
    • 150mm Fire Bell
    • 200mm Fire Bell
    • Buzzer Mute
    • Vantage Combi
    • Vantage Sounder
    • Vara
    • Vector Sounder
  • Speakers
    • 100mm Ceiling Speaker
    • 200mm Ceiling Speaker
    • Horn Speaker 10 Watts
  • Visual Warning Devices
    • Remote LED
    • SONOS T3 LED Strobes
    • Strobe ASL-30
    • XP95 Open Area Sounder Beacons
  • Local Alarm Panels
  • MultiAmp Power Supplies
    • MultiAmp 2A PSU
    • MultiAmp-DH Series
• Beam Detectors
  • Fireray 5000 Beam Detectors

Ampac Solutions

• Conventional Fire Systems
• Intelligent Fire Systems
• Alarm/Warning Systems
• Agent Release Systems
• High Sensitivity Detection
• Graphic Interface

Eight Zone Conventional Board

The Eight Zone Conventional Board has been designed for the LoopSense range of fire alarm control panels, providing the ability to interface to conventional zones

FEATURES

• Allows LoopSense to support conventional detectors

• Ability to accommodate for up to 40 detectors per zone

• The board supports up to eight conventional zones, LoopSense can support up to four boards, resultantly providing for up to 32 conventional zones

• Supports Apollo Orbis, Series 60, Series 65, Hochiki, Nittan Sensortec and the Argus Aurora ranges of conventional detectors

• Features a programmable end of line (EOL) that allows for 3K3, 4K7, 6K8 and 10K resistor values or 10uF capacitor for use with head removal diode bases

• Maximum alarm current per zone is 25 mAs

• The zone interface circuitry is capable of recognising and reporting the following conditions:
1. Normal
2. Open Circuit
3. Short Circuit
4. Alarm

• Can be programmed to function in the following modes:
1. Normal (latching)
2. Non-latching/Self Reset
3. Dependency A, B and C (EN54-2 and AS7240-2)
4. Alarm Investigation facility